DS6301 CAN/LIN Board

By supporting CAN and LIN networks on one board, the DS6301 is tailored to typical applications for automotive projects.  

  • Support of ISO and non-ISO CAN FD
  • ​Low power modes and partial networking
  • Software-configurable termination and CAN feedthrough mode

Application Areas

The DS6301 CAN/LIN Board is the interface between a dSPACE SCALEXIO system and CAN, CAN FD and LIN bus systems. It has eight channels, four of which are dedicated for CAN/CAN FD communication and the other four for LIN communication. All features and settings of this board can be configured with the dSPACE software ConfigurationDesk.

Key Benefits

With its support of CAN and LIN networks, the DS6301 is tailored to typical applications for automotive projects. With 8 channels per board, it offers a high channel density. Its integrated FPGA provides high flexibility and low I/O response times.  

Parameter Specification
General
  • 8 bus channels in total
    • 4 CAN/CAN FD channels
    • 4 LIN channels
  • 1 x 50-pin Sub-D connector
CAN communication (CAN 2) Buses
  • CAN/CAN FD (ISO 11898-1, ISO 11898-5, ISO 11898-6 , and non-ISO)
  • High-speed CAN (ISO 11898-2)
  • Fault-tolerant CAN (ISO 11898-3)
  • Overcurrent protection 100 mA

 

High-speed CAN / CAN FD

  • NXP TJA1145T/FD high-speed CAN transceiver
  • Data phase baud rate for CAN: 40 kBd ... 1 MBd
  • Data phase baud rate for CAN FD: 40 kBd ... 8 MBd
  • Usable in SAE J2284-4 and SAE J2284-5 CAN networks
  • Use of customer-specific transceiver possible
  • Software-configurable termination: 560 Ω or 5.6 kΩ

 

Fault-tolerant CAN

  • NXP TJA1055 fault-tolerant CAN
  • Data rate: 40 kBaud ... 125 kBaud
  • Software-configurable termination: 120 Ω

 

Resistance

  • Software-configurable termination
  • High-speed CAN: 120 Ω
  • Fault-tolerant CAN: 560 Ω or 5.6 kΩ

 
LIN communication (LIN 2)
  • Support of LIN standards (1.3, 2.0, 2.1, 2.2)
  • Overcurrent protection 20 mA

 

Transceiver
  • Infineon TLE 7257SJ
  • Data rate: 0 Bd ... 20 kBd

 

Resistance
  • 1 kΩ (software-configurable master termination)
Internal communication interface
  • IOCNET
Physical size
  • 238 x 100 x 59 mm (9.4 x 3.9 x 2.3 in)
  • Requires 1 slot
Voltage supply
  • 24 V
Typical power consumption
  • 5.1 W

The DS6301 provides 4 CAN/CAN FD channels and 4 LIN channels.
The channels are defined and configured graphically with dSPACE ConfigurationDesk. This comprises functions such as termination and CAN feedthrough mode. The DS6301 supports the standards typically used in automotive applications, such as high-speed CAN and CAN low power modes (Wake-up and Sleep).

ConfigurationDesk Configuration and implementation software for dSPACE real-time hardware SCALEXIO Processing Unit Product lines for high core performance and high parallel performance DS6001 Processor Board High-performance processor board for SCALEXIO systems SCALEXIO AutoBox A powerful modular real-time system for in-vehicle use SCALEXIO LabBox A compact modular real-time system SCALEXIO Rack System The SCALEXIO rack system is very flexible due to extensive I/O features. All hardware is software-configurable, making it easy to adapt the system to changing project requirements. SCALEXIO Customized System The dSPACE SCALEXIO customized system is a highly versatile hardware-in-the-loop simulator that offers a comprehensive range of adaption and configuration options to meet customer-specific requirements. Bus Manager Configuration tool for LIN, CAN, and CAN FD bus simulation RTI CAN MultiMessage Blockset Connects dSPACE systems with CAN communication networks RTI LIN MultiMessage Blockset Connects dSPACE systems with LIN communication networks
  • SCALEXIO Product Information, PDF, English, 16194 KB
Support

Drive innovation forward. Always on the pulse of technology development.

Subscribe to our expert knowledge. Learn from our successful project examples. Keep up to date on simulation and validation. Subscribe to/manage dSPACE direct and aerospace & defense now.

Enable form call

At this point, an input form from Click Dimensions is integrated. This enables us to process your newsletter subscription. The form is currently hidden due to your privacy settings for our website.

External input form

By activating the input form, you consent to personal data being transmitted to Click Dimensions within the EU, in the USA, Canada or Australia. More on this in our privacy policy.