The following list gives you an overview of the main innovations in dSPACE Release 5.3.
| Product |
Details |
| ASM 1.3 |
ASM VehicleDynamics
- Geometrical suspension models (McPherson strut, rigid axle, semi-trailing arm)
ASM Engine Diesel
- Engine test cycles for speed and torque stimulation
- Truck engine parameterization example
|
| AutomationDesk 1.5 (with Real-Time Testing 1.1) |
- Support of DS1005 PPC Board for Real-Time Testing
- Real-Time Testing can be used on MP nodes (DS1005- and DS1006-based MP systems).
- AutomationDesk-Automation Server is able to run real-time tests.
|
| CalDesk 1.4.1 |
- Support of measurement files (*.idf files) greater than 2 GB
- Uploading ECU memory contents via dSPACE ECU Flash Programming Tool
|
| ConfigurationDesk 1.2 |
- New platform management concept for RapidPro
- Support of SC-TC 8/1 (DS1638, 8-channel thermocouple sensor input) module for RapidPro
|
| ControlDesk 3.1 |
- New CAN Navigator features:
- CAN bus data monitoring (raw data)
- CAN bus data logging
- Conversion of IDF files larger than 2 GB
|
| FlexRay Configuration Package 1.3 |
|
| ModelDesk 1.1 |
- Tool automation of ModelDesk (with scripting languages such as Python and MATLAB M files)
- ModelDesk–MotionDesk tool coupling (When ModelDesk downloads a road, the MotionDesk scene is updated automatically)
- Graphical parameterization of geometrical suspension models
|
| MTest 1.5 |
- Using CTE for reference data specification
- Several usability improvements
|
| RTI CAN Multimessage Blockset 1.5 |
- Support of new CAN Navigator features:
- CAN bus data monitoring (raw data)
- CAN bus data logging
|
| RTI LIN MultiMessage Blockset 1.2 |
- Sleep support
- Transmit and receive go-to-sleep command
- Test features for run-time tests, e.g.
- Dynamic LIN frame checksum for n times
- Selectable signal default, "from LDF" or "from DBC"
- Corruption of break length and break delimiter
- Changing baud rate
- Changing message length and termination during run time
|
| RTI Bypass Blockset 2.2.2 |
- Support of DS2202, DS2210 and DS2211 in bypassing via CCP and XCP on CAN
- XCP on CAN gateway functionality allowing arbitrated access to ECUs from the dSPACE bypassing system and a calibration tool at the same time, even if only one XCP service instance is implemented on the ECU.
- Support of Toshiba TMP1984 processor with DCI-GSI1 via NBD/AUD.
|
| MATLAB Support |
|
