| Product |
Details |
| ASM 2.1 |
- ASM Trailer for ASM Vehicle Dynamics
- ASM Engine support in ModelDesk
|
| AutomationDesk® 2.3 (with Real-Time Testing 1.6) |
AutomationDesk:
- Enable & disable test steps/sequences/folders for execution
- Improved plotting & reporting, e.g. statistics and overviews at the beginning of the report
- Real-Time Test Manager Library
- Further extensions to COM API
Real-Time Testing 1.6:
- RT-RS232 library
- Direct access to onboard RS232 interfaces (DS1005 and DS1006)
- No RTI block in model necessary
- CAN library for MicroAutoBox
- Restart data replay within a single RTT sequence
|
| CalDesk® 3.0 |
New features with CalDesk:
- Automate typical tasks in CalDesk, create and configure experiments automatically via scripts
- Use integrated Python interpreter with syntax highlighting for scripting
- Create virtual signals (calculated variables) during post-processing based on calculation formulas and recorded data
- Create complex and photo-realistic layouts using an extended set of instruments
- Import and update SDF files for dSPACE devices much faster
New features with Variable Editor:
- Update A2L files directly in CalDesk via integrated Variable Editor, e.g. by parsing map files
- Create individual groups in A2L files and copy and paste variable links
New features with ECU flash programming tool: Use DCI-GSI1 to flash brain-dead ECUs, i.e., ECUs whose flash contents may be corrupted. |
| ConfigurationDesk® 3.0.1 |
- Bugfixes and minor enhancements
|
| ControlDesk® 3.4 |
- Support of DS802 PHS Link Board and DS4004 HIL Digital I/O Board
- Bus Navigator with new design replaces CAN Navigator:
- New tree view available (with messages grouped by ECUs)
- Replay, monitoring, logging and filters directly accessible via tree
- Logging, replay and monitoring can be started and stopped separately per controller or globally
- Several enhancements for data capture, e.g.:
- Option to preserve capture variables and capture settings when the simulation model (SDF file) is replaced
- Export and import capture variables
- Remove of all, selected, or invalid capture variables
- New autoname mode for Stream to Disk data acquisition
- Support for strings longer than 128 characters in TRC file (e.g., block and variable names)
- Bugfixes and more minor enhancements
|
| FlexRay Configuration Package 2.1 |
- FIBEX 3.0 support
- PDU-based signal chain
- Signal manipulation via TRC file
- Automatic alive counter realization, configurable via TRC file
- Frame transmission manipulation via TRC file
- UpdateBit manipulation via TRC file
- Feature-based TRC file composition
- Adjustable safety margins before and after FlexRay tasks
- Send and receive wakeup pattern (also before network startup)
|
| ModelDesk 2.2 |
- Support of further ASM models:
- ASM Engine
- ASM Trailer
- ASM Traffic
- Bugfixes and minor enhancements
|
| MotionDesk 2.1.3 |
- Bugfixes and minor enhancements
|
| RTI AUTOSAR Package 1.0 |
- RTI extension for RCP and HIL to integrate existing AUTOSAR software components and compositions into a Simulink model
|
| RTI CAN Blockset 2.6.8 |
- Bugfixes and minor enhancements
|
| RTI CAN MultiMessage Blockset 2.4.1 |
- Support of baud rate change with inport
- Bugfixes and minor enhancements
|
| RTI LIN Blockset 2.0.17 |
- Bugfixes and minor enhancements
|
| RTI LIN MultiMessage Blockset 1.7 |
- Support of node configuration
- Configurable LIN network serial number
- Enable/disable automatic configuration
- Enable and disable node, also with automatic configuration
- Support of configured and preconfigured slave nodes
- Master request and slave response frames also useable in model during automatic node configuration
- Slave: Conditional change NAD Service
- Slave: Read by Identifier Service
|
| RTI Bypass Blockset 2.6 |
- Exchange ECU address, data type and value conversion method of variables dynamically without modifying and recompiling the Simulink model
- Use improved m-API to exchange the ECU interface type more easily via automation scripts (e.g. from XCP on CAN to JTAG/OCDS).
- Use RTI Bypass Blockset with and without A2L-files. ECU interface parameters typically contained in the A2L-file can be set via the m-API.
|
| SystemDesk® 2.0.4 |
- Performance improvements including RTE generation, Signal Mapping Editor, handling of diagrams
- Enhancement of ECU configuration, RTE generation, simulation
- Enhancement of the automation API
- Bugfixes
|
| TargetLink® 3.0.1 |
- Support for AUTOSAR 3.0 and further AUTOSAR improvements
- PIL support for Freescale MPC5561 with Diab Data and Greenhills Compiler
- Selected bugfixes
- Support for MathWorks Releases 2008b and 2009a
|
| MATLAB support |
- R2006b
- R2007a+
- R2007b+
- R2008a+
- R2008b
- R2009a
|
| Operating System Support |
- Windows XP Professional (32 bit version only) SP3
- Windows Vista (32 bit) SP1, SP2
- Windows Vista (64 bit) SP2, with exception of CalDesk 3.0
|
