Product |
Details |
ASM 4.1
|
Dolly extension for ASM Trailer
- Flexible trailer definition
- Complete trailer support, road train simulation
- Demo model for full- and semi-trailer
Subframe compliance in ASM Vehicle Dynamics
- Elastokinematics of a suspension subframe on the rear axle
Independent steering
- Independent steering behavior for left and right in all vehicle models
- ModelDesk support
|
AutomationDesk 3.6
|
Test Builder Custom Library
- Ready to use test framework
- Based on Framework Builder Library
- Highly customizable and transparent
VEOS Support1)
- VEOS Plant Model access via HIL API
- VEOS virtual ECU access via calibration interface
Miscellaneous
- Enhanced drag & drop of data objects to Exec blocks
- ControlDesk NG access read/write on platform
- Sort data objects by type
|
ConfigurationDesk 4.3
|
Implementation Version
- Architectural changes provide larger test systems
- Unlimited amount of functions
- Uniform Undo/Redo functionality
- All parameters can be edited in table views
- Centralized view for solving configuration conflicts
- Support of the new SCALEXIO I/O board (DS2690 Digital I/O Board)
|
ControlDesk 3.7.4
|
- Bugfixes and minor enhancements
Please note: ControlDesk 3.x will be delivered for the last time with dSPACE Release 2013-A.
|
ControlDesk 4.3
|
- Camera interface and video instrument
- Support of IDS uEye camera (USB, Ethernet)
- Support of Microsoft DirectShow interface (e.g., USB webcams)
- Online preview and synchronous recording playback (time cursor)
- Option to record in separate AVI file
- Avionics instruments
- Altimeter
- Artificial Horizon
- Heading Indicator
- Airspeed Indicator
- Virtual ECU testing with dSPACE VEOS (offline simulation platform based on DSDAQ Offline Platform, Signal Editor for offline simulation)1)
- Support of ASAM MDF 4.0
- Support of Vector VN16xx bus interfaces
|
dSPACE FlexRay Configuration Package 3.0
|
- Support of AUTOSAR System Templates (Version 3.2.2) as communication matrix
- Support of transmission modes (as defined in AUTOSAR 3.1.4 and higher)
- Support of send conditions (as defined in FIBEX)
|
ECU Interface Manager 1.2
|
- Automation interface for integrating bypass services and hooks directly from MATLAB®/Simulink®
- Deactivation of ECU functions in the original ECU application during run time (i.e., to minimize the influence of internal bypass functions on the ECU's runtime behavior)
- Deactivation of write accesses to selected ECU variables via a switch logic
- Option to assign a password to configuration packages
|
Model Compare 2.3
|
- Support of the new MATLAB model file format SLX in addition to the MDL format
- Permanent colorization of differences
- Revised display options for Model Navigator
- Compatibility to latest MATLAB and TargetLink versions
|
ModelDesk 2.6
|
- Support of MATLAB 64-bit
- Support of VEOS1)
- Trailer support
- Extended automation interface for variant handling of parameter sets
|
MotionDesk 3.1
|
- Publicly available automation interface
- Visualization of precipitation like rain or snow
- Native 3-D fullscreen mode
- Support of MicroAutoBox II
|
Real-Time Testing 2.0 |
- Support of VEOS (dSPACE offline simulator)1)
|
RTI Bypass Blockset 2.9.1
|
- Improved integration of C functions including associated A2L files in the bypass model
- Reuse of A2L variables already existing in the ECU code within the internal bypass model
- Support of A2L/AML version 1.6
|
RTI CAN Blockset 2.8.1
|
- Bugfixes and minor enhancements
|
RTI CAN MM Blockset 2.7
|
- Support of AUTOSAR System Templates (Version 3.2.2) as communication matrix
|
RTI FPGA Programming Blockset 2.4
|
- Easier changing of FPGA frameworks
- Faster FPGA Interface
- Direct Verilog support for the Handcode Interface (in addition to VHDL support)
- Support of ISE 14.1 (32-bit version)
|
RTI LIN MM Blockset 2.0 |
- Support of AUTOSAR System Templates (Version 3.2.2) as communication matrix
- Support of J2602
|
RTI RapidPro Control Unit Blockset 2.1
|
- Support of any crank/cam technology with fully configurable, map-based setup of the crank/cam wheel geometry
- Support of crank sensors with rotation detection for hybrid electric vehicles (HEV) and Start/Stop system development
- Fast, ECU-like engine synchronization
|
SystemDesk 3.2 / SystemDesk 4.0
|
SystemDesk 3.2
Support of AUTOSAR Release 3.2, 3.1 and 3.0
V-ECU (virtual ECU) Generation
- Generation of IoHwAbstraction, BSW Scheduler and improved ECU state manager
- Definition of RTE intervention points for preparing V-ECUs for test scenarios
- Generation of the V-ECU implementation
- Process support for automatic BSW module update and configuration
- Basis for VPU generation with SystemDesk and thus offline simulation with VEOS
V-ECU Simulation
- Offline simulation of ECU start up scenarios with VEOS
- Simulation of different system configurations (define if an ECU is part of the simulated system or not)
- New stimulation scenarios
- Manipulation of interrunnable variables and RTE status values
- Stimulation of an ECU and a bus breakdown
- Delaying the transmission of bus messages
SystemDesk 4.0
Support of AUTOSAR release 4.0
Modeling AUTOSAR software and system architectures
- Complete AUTOSAR 4.0 support
- AUTOSAR package view
- Specific dialogs for elements on software component level
- Generic modeling of all elements according to the structure of the AUTOSAR meta model
- Several validation opportunities
- Complete tool automation
AUTOSAR Data Exchange
- AUTOSAR file assignments
- Import and export of the AUTOSAR system extract
- Special roundtrip between SystemDesk and dSPACE TargetLink based on software component containers
|
TargetLink 3.4
|
- New interface concept to improve support of component-based development and incremental code generation
- Improved code efficiency: e.g., for structures, access functions, AUTOSAR, etc.
- Data Dictionary diff&merge via synchronized tree views
- Custom code patterns for arbitrary Simulink blocks
- Incremental code generation for AUTOSAR Software Components
- Further AUTOSAR improvements like AUTOSAR Compatibility Mode and update capability for AUTOSAR frame model generation
- Connection to VEOS (dSPACE offline simulator)
|
VEOS 3.0
|
- Integration and simulation of Simulink® models
- Simulation of virtual CAN bus communication
- Software-in-the-loop (SIL) and processor-in-the-loop (PIL) simulation
- Offline simulation via virtual ECU technology
|
MATLAB® support
|
- R2010b SP2
- R2011a
- R2011b
- R2012a
- R2012b
|
Operating system support
|
- Windows 7 SP1 (32/64-bit)
- Windows Vista SP2 (32-bit)
- Windows XP SP3 (32-bit)
|